Water Quality

C.C. Lynch & Associates, Inc. has firsthand experience with water quality monitoring equipment from many manufacturers and in many different applications. Whether it be low flow groundwater sampling or on-line instrumentation for process control our staff has the experience to help you select the best equipment for your application.

Multi-parameter Water Quality Meters

In-Situ, Inc. TROLL 9500 >>

Monitor and log up to 9 different water quality parameters at once. Available in a sub 2-inch or sub 4-inch platform. Customizable sensor options including In-Situ, Inc.’s RDO Optical DO Sensor which has proven to be one of the top performing optical DO sensors on the market and one of few to receive EPA approval as an alternate test procedure for BOD, CBOD, and DO monitoring under the Clean Water Act.


TROLL 9500 Low Flow System >>

Using In-Situ, Inc.’s unique FlowSense software low flow sampling is now easier than ever. Just input well specific information and the software will log stabilization readings for you as the well is purged. Easily print out well purge reports and sensor calibration records once back in the office. A must for any groundwater consultant.


In-Situ, Inc. AquaTROLL 100 and 200 >>

Level, Temperature, and Conductivity all from one sub ¾” device. Internal batteries guaranteed for 5 years at a 15 minute data logging interval. Extend deployment times with the TROLLShield Antifouling System to prevent biological fouling within the conductivity sensor.


s::can On-Line Spectrometer Probes

Utilizing spectrometry, the spectrometer probes are the first and only instruments in the world that can measure optical spectra from 200 to 750 nm directly in liquid media. Measure a combination of TOC, DOC, BOD, Nitrate, Nitrite, BTX, turbidity, TSS, UV-254, color, ozone, temperature, and pressure all from one instrument in addition to monitoring for contaminants and providing an alarm when identified. There are no reagents used, no need for regular calibrations, and the probes utilize self cleaning systems for minimal maintenance requirements .


 

Spectral Probes

Parameters

 

 

 

 

 

 

 

 

  

Complementary Sensors

Parameters

spectro::lyser

TSS, Turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, Color, BTX, O3, H2S, AOC, Fingerprints and Spectral Alarms, Temperature and Pressure

 

ammo::lyser

ammonium

carbo::lyser

TSS, Turbidity, UV254, COD, BOD, TOC, DOC

 

oxi::lyser

Dissolved Oxygen

nitro::lyser

TSS, Turbidity, NO3-N

 

pH::lyser

pH

multi::lyser

Turbidity, TSS,  NO3-N, plus one organic parameter (COD, BOD, TOC, DOC, UV254

 

redo::lyser

ORP

ozo::lyser

Turbidity and Ozone

 

condu::lyser

Conductivity

uv::lyser

UV254 plus turbidity or TSS

 

soli::lyser

TSS

color::lyser

turbidity and color (hazen)

 

turbi::lyser

turbidity

Slick Sleuth Autonomous Oil Spill Detection Station >>

Non-contact, optical hydrocarbon sensor and alarming system. The Slick Sleuth ADS utilizes an optical sensor and the fluorescence properties of hydrocarbons to monitor for the presence of hydrocarbons on any surface located beneath the system. The system can run on AC power, plant DC power, or solar panels and batteries and oil detection alarms can be transmitted in a wide variety of ways.


MicroLAB Nutrient Monitor >>

MicroLAB is a fifth generation nutrient monitoring system designed for automaticsample collection and onboard analysis of nitrate, phosphate, silicate, or ammonia. This system is designed to be submerged at the sample collection point for typically 30-60 day deployments.


EcoLAB 2 Multi-Channel Nutrient Monitor >>

EcoLAB 2 is a nutrient monitoring system designed for automatic sample collection and onboard analysis of 1-4 parameters including nitrate, phosphate, silicate, and/or ammonia. This system is designed to be submerged at the sample collection point for typically 30-60 day deployments.